Trinity INFINITY User Manual

Infinity – Operational Manual
This document contains the latest technical information about
Infinity which is a micro-controller based energy meter. The
product Infinity is sophisticated electronic equipment, and the
user is advised to read this User's Manual carefully before
attempting to install or operate the equipment.
Published on: 15.05.2015
Document Version: 1.7
USER'S MANUAL
INFINITY
Energy Meter

Trinity INFINITY Specifications

General

Brand	Trinity
Model	INFINITY
Category	Measuring Instruments
Language	English

Summary

Warranty Statement

What This Warranty Does Not Cover

Details warranty exclusions like misuse, improper installation, and damage.

Introduction

The Main Features Available in the Model

Lists key features including accuracy, enclosure size, display type, and communication ports.

Technical Specifications

Back View Of The Unit

Installation and commissioning

3P4W Mode Installation Only

Details specific steps for installing the unit in 3P4W mode.

Operational Details

Programming Mode

Explains how to access and use the programming mode for device settings.

Setting CT-Primary

Guides on setting the CT-Primary value for accurate KWh measurements.

Setting Meter ID for RS485 port

Instructions for configuring the meter's unique ID for RS485 communication.

Setting Time to Run Hour and Load Run Hour

Details on setting Run Hour and Load Run Hour parameters for dual source meters.

Setting Energy Parameter for Display

Instructions to select KWh or KVAh for display on the meter.

Run Mode

Describes how calculated parameters are displayed in the meter's normal operating mode.

Communication

Modbus RTU on RS485 Port

Details on using Modbus RTU protocol over RS485 for data exchange.

Ordering Options