Operational Details
The Infinity is a versatile meter, with the features needed to
implement an accurate electrical energy measurement system.
The configurable parameters of the meter can be programmed in
Programming Mode. Run Mode is the normal mode where
measured values are displayed.
The unit can be operated by pressing the following Keys:
PROG
ENTR
After supplying power, the unit displays immediately power
receiving information such as “--TRINITY--", CT Ratio and Unit ID
on LCD screen for some time and then, by default, is in the Run
Mode such as shown below.
In Normal INFINITY meter,
12
Infinity – Operational Manual
KWh=112.10
To Next Page
Loading...
