36
3. Conducting a Remote Session
A remote session allows accounts IP access to computer/servers and serial devices connected to the KVM. In a remote session, accounts
can access computers/servers, power cycle or turn power to a Target Server Off/On, virtually mount an .iso file, and configure the remote
session settings. The sections that follow explain the features of a remote session, and how to use them.
3.1 Starting a Remote Session
To start a remote session:
1. OpentheWebCongurationInterface,andclickonthe
icon in the menu bar. The My Targets screen appears, displaying
onlythoseportsthatthelogged-inaccountispermittedtouse.Foradministratoraccounts,agraphicoftheKVM’sbackpanelis
displayed in between the Toolbar and Data Pane.
2. Aremotesessioncanbeinitiatedinoneoffourways:
• Select a port from the Data Pane of the My Targets screen, and click on the Display icon in the toolbar.
• Select a port from the Data Pane of the My Targets screen, and press the [Enter] key.
• Double-click on a port in the Data Pane of the My Targets screen.
• Administrator’s Only – Double-clickonaportinthegraphicoftheKVM’sback-panel.
Note: A Target Server with a Remote Exclusive Session or Local Exclusive Session status is being accessed by another account in
Exclusive Mode (see the Exclusive Session section in this manual for details), and cannot be accessed. A Target Server with a Remote
Session status is being accessed by another account in Share Mode, which allows for up to 5 users to access the port at the same time
(see the Sharing a Remote Session section in this manual for details).
3. Upon initiating a remote session in one of these four ways, the screen of the selected Target Server appears inside a remote console
window with the remote session toolbar displayed.
14-03-051 93-32D5.indd 36 3/14/2014 9:52:34 AM
To Next Page
Loading...
Need help?
General
