Tripp Lite NetCommander B070-008-19-IP User Manual

41
3. Conducting a Remote Session
3.2.5 Keys
– Clicking on the Keys iconwilldisplayalistofpredenedkeysequences(e.g.Ctrl+Alt+Delete)thatcanbeperformedontheTarget
Server.Bydefault,performingthesekeysequencesontheClientComputer’skeyboardsendsthecommandtotheClientComputer.Opening
the Keys menu and clicking on one of the predefined commands will send it directly to the Target Server. In addition, the Keys feature allows
you to add commands to the Keys drop-down list, and create commands that are not already provided.
Note: The Predefined and Custom Keys that are added to the Special Key Manager are unique to each port. You will need to customize the
keyboard sequences that are available for each port. Once you do this, you will not need to do it again, except to add or remove keyboard
sequences.
To add a keyboard sequence:
1. Click on the icon in the remote session toolbar, and choose the Special Keys option. The Special Key Manager window appears.
2. Click the Add Predefinedbuttontopullupalistofpredenedcommandsequences.
3. SelectakeysequenceandclickOK.ThesequenceappearsintheSpecial Key Manager window.
4. In the Special Key Manager window, click OK.ThesequenceappearsintheKeys drop-down list.
14-03-051 93-32D5.indd 41 3/14/2014 9:52:38 AM

Tripp Lite NetCommander B070-008-19-IP Specifications

General

Brand	Tripp Lite
Model	NetCommander B070-008-19-IP
Category	Switch
Language	English