Triton T80 GSI User Manual

18
10
Continued
SECTION
To adjust the shower temperature -
Economy and High settings only
• The water temperature is altered by increasing
or decreasing the flow rate of the water
through the shower via the temperature
control (g.20).
• After obtaining your showering temperature,
the knob can be left as the normal setting
and should only need altering to compensate
for seasonal changes in ambient water
temperature.
NOTE: The preferred knob position on ECONOMY
will give a different temperature to the same
position on HIGH.
To decrease the shower temperature
• Turn the temperature control anti-clockwise
- this will increase the flow of water through
the shower and make the water colder.
To increase the shower temperature
• Turn the temperature control clockwise -
this will decrease the flow of water through
the shower and make the water hotter.
NOTE: It is advisable that the showering
temperature is satisfactory by testing with your
hand before stepping under the showerhead.
There will always be a time delay of a few
seconds between selecting a flow rate and the
water reaching the stable temperature for that
flow rate.

Triton T80 GSI Specifications

General

Brand	Triton
Model	T80 GSI
Category	Bathroom Fixtures
Language	English