19
8
Continued
SECTIONSECTION
A. With the cover off the
shower turn the POWER
selector spindle clockwise
until the flat section is on
the left hand side (fig.13).
D. With the cover off the
shower turn the
temperature control so
that it goes to Maximum
HOT (fig.16).
Fig.16
Fig.13
Flat section
to left
hand side
B. With the cover off the
shower turn the stabiliser
valve spindle fully clockwise
until resistance is felt
(fig.14).
Fig.14
Stabiliser
valve
C. With the cover off the
shower turn the power
selector to the COLD
position (fig.15).
Fig.15