Zanté electric shower
21
CLEANING THE FILTER
The inlet filter is situated inside the solenoid inlet
(fig.39).
To gain access to the filter will require the cover
to be removed and disconnection and removal
of the compression fitting. Also, depending on
the incoming pipework arrangements, if there is
not enough slack in the pipework, it could mean
the removal of the unit from the wall.
When cleaning the filter, DO NOT use a sharp
object, as it will cause damage. It is preferable to
use an old toothbrush or similar.
Fig.39
INSTRUCTIONS FOR INSTALLERS AND SERVICE ENGINEERS ONLY
To Next Page
Loading...
Need help?
General
