EasyManuals Logo

Triumph Tiger 900 GT User Manual

Triumph Tiger 900 GT
235 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #149 background imageLoading...
Page #149 background image
MAINTENANCE
149
Drive Chain and Sprocket Wear
Inspection
Warning
Never neglect drive chain maintenance
and always have drive chains installed
by an authorized Triumph dealer.
Use a genuine Triumph supplied drive
chain as specified in the Triumph Parts
Catalog.
The use of non-approved drive chains
may result in a broken drive chain or
may cause the drive chain to jump off
the sprockets leading to loss of
motorcycle control or an accident.
Caution
If the sprockets are found to be worn,
always replace the sprockets and drive
chain together.
Replacing worn sprockets without also
replacing the drive chain will lead to
premature wear of the new sprockets.
2
1
10-20
KG
1. Measure across 20links
2. Weight
To inspect the drive chain and sprocket
wear:
Remove the drive chain guard.
Stretch the drive chain taut by
hanging a 20 - 40 lb (10 - 20 kg)
weight on the drive chain.
Measure the length of 20links on the
straight part of the drive chain from
pin center of the 1st pin to the pin
center of the 21st pin. Since the drive
chain may wear unevenly, take
measurements in several places.
If the length exceeds the maximum
service limit of 12.56 in (319 mm), the
drive chain must be replaced.
Rotate the rear wheel and inspect
the drive chain for damaged rollers,
and loose pins and links.
Also inspect the sprockets for
unevenly or excessively worn or
damaged teeth.
ccol
Worn Tooth
(Engine Sprocket)
Worn Tooth
(Rear Sprocket)
(Sprocket wear exaggerated for
illustrative purposes)
If there is any irregularity, have the
drive chain and/or the sprockets
replaced by an authorized Triumph
dealer.
Reinstall the drive chain guard,
tightening the fasteners to 80 lbf in
(9Nm).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Tiger 900 GT and is the answer not in the manual?

Triumph Tiger 900 GT Specifications

General IconGeneral
Displacement888 cc
Power93.9 HP (70 kW) @ 8, 750 rpm
Torque87 Nm @ 7, 250 rpm
Transmission6-speed
Seat Height810-830 mm (adjustable)
Tires (Front)100/90-19
Tires (Rear)150/70 R17
Engine TypeLiquid-cooled, 12 valve, inline 3-cylinder
Front BrakesTwin 320mm floating discs, Brembo 4-piston radial monobloc calipers
Rear BrakesSingle 255mm disc, Brembo single piston sliding caliper
Fuel Capacity20 L
FrameTubular steel frame
ABSSwitchable ABS
Traction ControlSwitchable traction control
Riding ModesRoad, Rain, Sport
Rear SuspensionMonoshock, adjustable preload and rebound damping
Weight (Wet)210 kg (463 lbs)
InstrumentationTFT color display

Related product manuals