BODYWORK
Surey Top (cont'd.)
1. Apply marking
blue
to the
press
button, attached to
the rear
corner
of
the
surrey
top,
pull
the fabric taut and transfer
the
marking to the backlight frame.
2. Drill the frame
and
fit the
press
stud.
3.
Engage
each
valance tensioner with a hook revealed
by
turning
back
the weathe$trip at each side of the door.
4. Secure
the
press studs.
When closing the door, ensure that
the top
edge of the cover
shown held in Fig. 76 is
to the
outside, and
the
backing strip to
the inside of the
window in the raised position.
Fie.76
(top)
Bte. 77
(left)
To Next Page
Loading...
