51
64
54
55
41
40
65
65
41
40
62
70
61
1569-8
ASSEMBLY STEP
STEP 07
• Attach the Seat (55) to the Seat Post (54) with attached Nuts (41), Washers (40) and
Spring Washers (65)
• Remove the Seat Knob (51), and then insert the Seat Post (64) into the Main Frame (1)
• Fix at the desired height with the Seat
Knob (51)
STEP 08
• Connect the Extension Wire (62) and Pulse Wire (70) with
the Wires of the Computer (61).
• Attach the Computer (61) to the Handle Rod.
Recheck
all bolts and nuts are
tightened securely
before using the machine
CAUTION:
Ensure that cables are not damaged
during assembly or when tightening screws.