1569-9
5. COMPUTER FUNCTION
SPECIFICATIONS
TIME (TMR)
00:00-99:59
ODOMETER (IF HAVE)
0-9999 KM
SPEED (SPD)
0.0-99.9 KM/H
PULSE (IF HAVE)
40 - 240 BPM
DISTANCE (DST) 0.00-999.9 KM
CALORIES (CAL) 0-9999 KCAL
KEY FUNFCTION
MODE
Use this key to select the particular function that you want
OPERATUION PROCEDURES
AUTO ON/OFF
• The system turns on when any key is pressed or when it receives input from
the speed sensor.
• The processor turns off automatically when the speed sensor has no signal
input or no key is pressed for 4 minutes.
RESET The unit can be reset by changing the batteries or pressing the MODE key for
3 seconds.
HOW TO VIEW TIME, DISTANCE,
ODOMETER, PULSE & CALORIES
Press the MODE key when the pointer is on the function you want which will
start flashing.
FUNCTIONS TIME
The exercise time will be displayed
by pressing MODE key until TMR
appears.
SPEED
Current speed will be shown by
pressing MODE key until SPD appear.
DISTANCE
The distance of each workout will be
displayed by pressing MODE key until
DST appears.
ODOMETER Press the MODE key until the display
highlights ODO. The total accumulated
distance will be shown.
PULSE User’s current heart rate is displayed
in beats per minute (BPM) by pressing
MODE key until PULSE appears. Place
the palms of your hands on both
of the contact pads and wait for 30
seconds for the most accurate reading.
CALORIES
The calories burned will be displayed
by pressing MODE key until CAL
appears.
SCAN
Automatic display of the following
functions in the order shown TIME-
SPEED-DISTANCE-ODOMETER-
PULSE-CALORIES
BATTERY
This monitor uses two AA batteries. If incorrect data displays on the monitor, please reinstall the batteries
To Next Page
Loading...
Need help?
General
