PULSE WINDOW
This displays the heart rate during the workout. Both hands need to be rmly placed on the heart rate pulse
handles. The range displayed is between 50 -200 beats/min.
Note: This data is just for reference, and cannot be taken as the medical data.
REAL TIME WINDOW
This will display the actual time.
ODOMETER DISPLAY WINDOW
This will display the total running distance of the treadmill.
MATRIX WINDOW
This matrix window will show a virtual example of a 400 m running track. Once you nish running one lap, it
will beep and highlight the laps that have been done.
BUTTON FUNCTION:
PROGRAM
Before starting a workout, pressing “PROGRAM” will scroll through the programs from 0,0-P1-P2-P3-P4-
P5-P6-P7-P8-P9-P10-P11-P12-P13-P14-P15, U1, U2, U3 and FAT. There are 15 Pre-set Programs, 3 User
Programs and 1 Body Fat Test.
MODE
Used to select between the Manual, Time Count-Down, Distance Count-Down, or Calorie Count-Down
modes. You are able to adjust the default setting by using the “SPEED+/-” buttons. Press the “START” button to
begin the workout.
START
Press the “START” button to start the machine. Ensure the safety key is connected.
STOP
While the treadmill is in the Manual or Program mode, pressing the “STOP” button will stop the current
workout session and cancel and pre-set programs.
SPEED +
Press “SPEED +” to increase the speed by 0.1 km/h while the walking belt is moving.
Holding down “SPEED +” will increase the speed by 0.5 km/h. Release the button once the desired value has
been reached.
SPEED -
Press “SPEED -” to decrease the speed by 0.1 km/h while the walking belt is moving.
Holding down “SPEED -” will decrease the speed by 0.5 km/h. Release the button once the desired value has
been reached.
INCLINE +
Press this button to adjust the incline up while the machine is on.
INCLINE –
Press this button to adjust the incline down while the machine is on.
To Next Page
Loading...
