DISPLAY WINDOW:
SPEED DISPLAY WINDOW
During a workout the Speed will be displayed. The speed ranges between 0.8 to14 km/h.
During Program Setting, the program proles will be displayed. The programs range from P1 to P9.
During the Mode Setting, the mode will be displayed. The Modes range from H1 to H3.
INCLINE WINDOW
During a workout this will display the treadmill incline. The incline ranges from 0-16 levels.
TIME WINDOW
During a workout this will display the duration. This time ranges from 0:00 to 99:59.
Once it reaches 99:59, the running deck will stop slowly and display “END” then return to the standby state
after 5 seconds.
During a count down mode, the time will count-down from the set time to 0:00. Once it has reached 0:00, the
running deck will stop slowly and display “END” then return to the standby state after 5 seconds.
DISTANCE WINDOW
During a workout this will display the distance travelled. It will count from 0,00 to 99.9 km. Once it has
reached 99,9 km it will start counting from “0” again.
Should a set distance be set, the treadmill will count-down from the set distance until it reaches 0,00 km, the
running deck will stop slowly and display “END” then return to the standby state after 5 seconds.
CALORIES WINDOW
This displays the calories burnt during the workout. It will count up from 0 to 999 cal. Once it has reached 999
cal it will start counting from “0” again.
During countdown mode, the calories will count down from the set calories to 0 cal. Once it has reached 0:00,
the running deck will stop slowly and display “END” then return to the standby state after 5 seconds.
To Next Page
Loading...
