Proper maintenance is very important to ensure your treadmill is always in top working condition.
Improper maintenance could cause damage or shorten the life of your treadmill and exceed the
Limited Warranty coverage.
Inspect and tighten all parts of the treadmill regular.ly Replace any worn parts immediately.
CLEANING
The Trojan Motion 360 Treadmill can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents on plastic parts. Please wipe your perspiration off the Trojan Motion 360
Treadmill after each use. Be careful not to get excessive moisture on the computer display panel
as this might cause an electrical hazard or electronics to fail.
Please keep the Trojan Motion 360 Treadmill, especially the computer console, out of direct
sunlight to prevent screen damage. Please inspect all assembly bolts and pedals on the machine for
proper tightness before use. Routine cleaning of your treadmill will extend the product’s life.
STORAGE
Store the Trojan Motion 360 Treadmill in a clean and dry environment away from children.
BELT ADJUSTMENT
Belt adjustment and tension performs two functions: Adjustment for tension and centering. The
running deck has been adjusted properly at the factory. However transportation, uneven ooring
or other unpredicted reasons could cause the belt to shift off centre resulting in the belt rubbing
with the plastic side rail or end caps and possibly cause damage. To adjust the belt back to its
proper position please follow the directions below.
Your treadmill should require little maintenance other than to periodically apply lubricant.
Lubricating under the running deck will ensure superior performance and extend the treadmill’s
life expectancy.
HOW TO CHECK RUNNING DECK FOR PROPER
LUBRICATION
•Liftonesideoftherunning deck and feel the top surface of
the treadboard.
•Ifthesurfaceisslicktothetouch,thennofurther
lubrication is required.
•Ifthesurfaceisdrytothetouch,applyonepacketof
lubricant or half of the bottle of lubricant.
To Next Page
Loading...
Need help?
General