Trojan MOTION 360 - Assembly Steps; Step 1: Console and Upright Tube Installation

8
10322

INSTRUCTIONS FOR ASSEMBLY
• Unpack the carton and use the parts check list to check that all parts are accounted for.
• Do not dispose of the packaging material until assembly is completed.
• Tools are provided for use in assembly.
• Majority of the parts here have been preassembled at the factory.
1
STEP 1:
• Lift up the Console Display (A) and Upright Tube (B) as indicated in the diagram.
Note: When lifting the Console Display (A) and Upright Tube (B), make sure not to pinch the wires inside
the upright tubes.