1061M-22
13. FREQUENTLY ASKED QUESTIONS
Q1. How do I maintain my cables?
1. The cables work in conjunction with the pulleys. When assembling the unit; make sure not to over
tighten the pulleys. The pulleys are meant to move freely.
2. Before your workout; make sure all the cables are lined up correctly on the pulleys.
Q2. My moveable parts are not moving freely?
1. Make sure not to over tighten the oil bushes as the butterfly arms have to move freely.
2. Do not over tighten any bolt or nut which has bushes and moveable parts
Q3. My weight stack is not moving freely
1. Apply a light coating of grease to the guide tubes, as this will help reduce any unneccesary friction.
Q4. Is it possible to leave my weights on the bench once I have finished my workout?
1. It is not advisable as this could cause injury or cause the bench to fall over.
Q5. Is it possible to secure my bench to the ground?
1. Yes, provided that the area in which you are going to secure it is going to be in in a permanent location and that
the floors are not tiled
Q6. My bench is not stable
1. Ensure that all bolts are tightened and that all the end caps are on legs.
Q7. Is it a good idea to use my bench in a commercial gym?
1. No, as it is for domestic use only.
To Next Page
Loading...
