Trojan POWER STACK 500 - ASSEMBLY STEPS; STEP 10

1574-17
STEP 10
• Rotate Butterfly Cable (71) as shown.
• Install Pulley no. 15, 16, 17 to unit using 3- 3/8”x2” Hex Bolts (80) 6- 3/8” Washers (86) 3-3/8” Locknuts (83)
• Attach ends of Butterfly Cable (71) to left/right Press Frame (4, 5) using 2-M8x30mm Hex Bolts (97) 4-M8 Washers
(99) 2-M8 Locknuts (98).
ASSEMBLY STEP
71
33
34
98
99
99
97
80
86
86
83
31
46
46
80
86
80
86
83
86
16
71
15
16
17