Trojan PURSUIT 310 - Page 6

10102M-6
ASSEMBLY STEPS
STEP 04
Remove 3 Nylon Nuts (58) and 3 M8 Washers (62) from the Seat (67).
Attach the Seat (67) to the Saddle Post (4) with 3 M8 Nylon Nuts (58)
and 3 M8 Washers (62). Fix it at the desired height with the quick
release Knob (61).
STEP 05
Attach Handlebar (3) to Handlebar Post (2) with Clamp Cover
(59) and T Knob (60).
!
!