Trojan PURSUIT 310 - Page 7

Recheck
all bolts and nuts are
tightened securely
before using the machine
10102M-7
ASSEMBLY STEPS
STEP 07
Insert the Left and Right Pedal (66) into the Crank (12).
Note: the Right Pedal (66) should be tightened clockwise and
Left Pedal (66) tightened counter-clockwise.
!
STEP 06
Attach the Hand Pulse Wire (80) and Computer Wire (78) to the Computer (77).
Attach Computer (77) to the Handlebar Post (2) with four M5*12 Screws (84).
CAUTION:
Ensure that cables are not damaged during assembly or
when tightening screws
!