Trojan SPIN 100 - Page 12

12
SPIN100-SB
STEP 5: ADJUSTING THE TENSION
To increase resistance (requiring more strength
to pedal), turn the Emergency Brake & Resistance
Control Knob (30) to the right.
To decrease resistance (requiring less strength to
pedal), turn the Emergency Brake & Resistance
Control Knob (30) to the left.
STEP 6: USING THE EMERGENCY
BRAKE FUNCTION
The Emergency Brake & Resistance Control Knob
can be used as the Emergency Brake. When
you want the ywheel to stop turning, you
must rmly press down the Emergency Brake &
Resistance Control Knob (30).
ASSEMBLY STEPS
STEP 5
STEP 6

