Trojan TR510 - Page 16

16
OPERATION INSTRUCTIONS
ERROR
CODE
FAULT DESCRIPTION SOLUTION
E07 Safety key is not
attached
Attach the safety key correctly
E08 EEPROM is damaged Replace the controller
E09 Incline motor is faulty 1. Check the cable connection
2. Replace the speed sensor
Console
display not
working
1. Connect the Console
2. Plug every connector correctly
3. Reset the overload protector
4. Replace the transformer
Console
display
ashes
Replace the Console
#22M05T003 TR510 Treadmill - User Manual V3.indd 16 2022/09/27 2:38 PM