Enable or Disable a Target Value
To enable a displayed target value, press the corresponding
numeric key on the target value menu. The gauge enables the
target value and returns to the Ready screen.
Enter a New Target Value
To enter a new target value, press 〈5〉 at the target value
menu. The gauge displays:
Use the numeric and decimal keys to enter the target value.
Press the
〈ENTER/START〉 key. The gauge displays:
To store the value, press the 〈YES〉 key.
To use the value now without storing it for later use, press
the
〈NO〉 key.
If 〈YES〉 is pressed, the target value, the gauge displays:
The gauge can store the target value in one of four memory
cells. Use the numeric keys to store the target value. Note that
this will replace any target value that was previously stored.
The gauge enables the target value, displays a brief
confirmation message and returns to the Ready screen.
Do You Want t o
Save Thi s Val ue
f or Lat er
Us e?
Gmb( Mar shal l ) Val ue:
0. 0 pcf
Pr ess <ENTER>
1. #. # 2. #. #
3. #. # 4. #. #
Pr ess # To Sel ect
To Next Page
Loading...
