Troxler PaveTracker Plus 2701-B - Chapter 5. Project Data; Handling Project Data

5-2
Handling Project Data
The Model 2701-B can store approximately 1000 readings.
The Project and Store functions allow handling of
measurement data. Measurement results are stored in files
(memory locations) called projects, which are named by the
operator. The Project function allows the operator to create a
new project, view project data, select a project (make an
existing project active so that additional data may be added
to it), output the data stored in the project, or erase projects.
The Store function allows the operator to store measurement
results and other test-identifying information in a selected
project. Refer to page 5-10 for information on the Store
function.
To access the Project function, press the 〈PROJ〉 key. The
gauge displays the Project menu:
Use the arrow keys to scroll through the menu options. Use
the numeric keys to select a menu option. Press
〈ESC〉 to
return to the Ready screen.

- Pr oj ect -
4.
Er ase
5. Out put

- Pr oj ect -
1.
Sel ect
2.
Vi ew
3. Cr eat e