Creating a Project
1. To create a new project, press 〈3〉 at the Project menu
shown on page 5-2. The gauge displays:
2. Press the 〈ALPHA LOCK〉 key to enable the alphabetic
keys on the gauge. When the alphabetic keys are enabled,
the symbol A appears in the upper right of the display, as
shown above.
3. Enter the project name (up to twelve characters) and press
the
〈ENTER/START〉 key.
4. If the Layer Thickness function (see page 2–14) is enabled,
the gauge prompts for the layer thickness:
5. Enter a layer thickness from 25 to 102 mm (2.0 to 4.0 in.)
and press the
〈ENTER/START〉 key. The gauge displays:
6. To enable the new project, press the 〈YES〉 key. The gauge
enables the new project, displays a brief confirmation
message, and returns to the Project menu.
<ALPHA> f or Let t er s
<ENTER> t o Exi t
Thi ckness
51 mm
Pr ess <ENTER>
XXX
Act i ve?
<YES> or <NO>
To Next Page
Loading...
