Troxler PaveTracker Plus 2701-B - Page 33

Model 2701-B
2–13
User ID
The PaveTracker Plus stores a three-character user ID with
each measurement. To enter or change the user ID, press
〈7〉
from the Setup menu shown on page 2–7. The gauge
displays:
To change the user ID, press 〈YES〉. The gauge displays:
Press the 〈ALPHA LOCK〉 key to enable the alphabetic keys on
the gauge. When the alphabetic keys are enabled, the symbol
A appears in the upper right of the display, as shown above.
Enter the new user ID and press 〈ENTER/START〉. The gauge
stores the new user ID and returns to the Setup menu.
Mix Calibration
The Mix Calibration function is used to adjust gauge
measurements, as described on page 3–7.
I nput Us er I D A
<ALPHA> f or Let t er s
Pr ess <ENTER>
Us er I D
XXX
Do You Want To
Change Us er I D?
2. GETTING STARTED