External Beeper
The PaveTracker Plus is equipped with an external beeper
mounted on its underside. The external beeper can be
enabled or disabled as desired. To control the external
beeper, press
〈5〉 from the Setup menu shown on page 2–7.
The gauge displays:
Press 〈1〉 to enable the external beeper or 〈2〉 to disable it. The
gauge sets the external beeper function to the desired state,
displays a brief confirmation message, and returns to the
Setup menu.
GPS Option
The PaveTracker Plus can be equipped with an optional GPS
receiver, which enables the gauge to store each measurement
with precise coordinates and a standard date and time stamp.
To toggle the GPS function on or off, press 〈6〉 from the Setup
menu shown on page 2–7. The gauge displays:
Press 〈1〉 to enable the GPS or 〈2〉 to disable it. The gauge sets
the GPS function to the desired state, displays a brief
confirmation message, and returns to the Setup menu.
1.
ON
2.
OFF
Pr ess # t o Sel ect
1.
ON
2.
OFF
Pr ess # t o Sel ect
To Next Page
Loading...
