Troxler PaveTracker Plus 2701-B - Page 43

Model 2701-B
3–5
To enter a new density offset, press 〈3〉. The gauge prompts
for the density offset as shown below:
To change the offset, use the arrow keys to select the offset
sign (positive or negative). The gauge displays:
Enter the density offset as determined from the procedure on
page 3–3 and press
〈ENTER/START〉. The gauge enables the
new offset and returns to the Ready screen.
Dens i t y Of f set
#. ## pcf
Sel ect ( +/ - )
Dens i t y Of f set
+ #. ## pcf
I nput and
Pr ess <ENTER>
4. USING THE GAUGE