♦ User ID
♦ Location (right or left) of centerline – This value is blank if
not in continuous mode.
♦ Distance from centerline – This value is 0.0 if not in
continuous mode.
♦ Latitude
♦ Longitude
♦ GPS Fix
Note that the station number, distance from centerline, and
location with respect to centerline fields are available only for
continuous mode measurements.
Storing Data in Continuous Mode
When taking measurements in continuous mode, the operator
can store the data in the selected project by pressing the
〈STORE〉 key at any time when the gauge is displaying
measurement data, or after returning to the Ready screen.
The gauge displays:
Press 〈NO〉 to store only the measurement results under
the active project and return to the previous screen.
Press 〈YES〉 to store the station number, distance from
centerline, and location with respect to centerline project
notes along with the measurement. The gauge displays:
Add Not es?
<YES> or <NO>
Pr ess <ENTER>
To Next Page
Loading...
