Storing Data in Averaging or Segregation
Mode
After taking a measurement in averaging or segregation
mode, the operator can store the data in the selected project
by pressing the
〈STORE〉 key when the gauge displays the test
results or after returning to the Ready screen. The gauge
displays:
Press 〈NO〉 to store only the measurement results under
the active project and return to the previous screen.
Press 〈YES〉 to include project notes along with the
measurements results. The gauge displays:
Enter any desired information (up to eight characters) and
press
〈ENTER/START〉. The gauge stores the test results and
notes under the active project and returns to the previous
screen.
Add Not es?
<YES> or <NO>
Pr ess <ENTER>
To Next Page
Loading...
