5000 Series Weigh Scale Indicator Quickstart Guide
5
5
Setting up the indicator
The first time that you turn on the indicator, follow the step by step instructions to set
the language, country, date and time.
When shipped, the indicator is set up to manually record animal weights and IDs,
without drafting. You should change the way that the indicator is set up to suit the
task that you are about to perform.
Applying a favourite setup
Favourite setups are saved configurations that change the settings of the indicator to
suit a particular purpose. The indicator comes pre-loaded with various favourite
setups such as ‘Weigh with ID’ (weigh animals and record IDs at the same time).
When you start a new session you have the option to apply a favourite setup. In the
New Session screen, press
.
For more information about sessions, see
Recording information
on page 6.
Further modifying settings, if desired
After you have applied a favourite setup, you can further modify any of the settings, if
desired.
To modify the settings, from the Home screen, press
.
You can also change the information that you would like to see on the Weigh screen
during weighing.
To set up the Weigh screen, from the Settings screen, press
.
After you have changed any of the settings, you can save these settings as
your own customised favourite setup. It will then be possible to apply this
favourite setup next time you want to do the same task. For example, you
could start with the favourite setup ‘Draft by weight with ID’, add Sex and
Breed fields to the Weigh screen, then save the modified setup to use again
later.
To Next Page
Loading...
