CHAPTER 2: ASSEMBLY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100 13
TREADMILL ASSEMBLY STEPS (continued):
11) Run Treadmill Calibration:
WARNING:
This process will take full control of the treadmill and can be dangerous if caution is not taken.
• Calibration can take up to two minutes to complete.
• Do not stand on the treadmill during the calibration procedure.
• Verify that the machine is free of all parts and tools.
• Keep children and animals at a safe distance.
Calibration Steps:
• Remove the safety key
• Replace the safety key
• When the screen goes blank, immediately press and hold the up and down incline keys until “CAL” appears on
the console display.
• Press start to activate the auto calibration.
• Upon completion the console display will read “DONE” followed by “PASS” or “FAIL”.
To Next Page
Loading...
