Trueshopping
Changing the Strimmer Spooler
When you have used the provided strimmer line then you need
to change it using an approved similar line. Do not use a metal
line.
Figure 21 Step 1 Unlock Spindle
Lay the product on a flat stable surface with the trimming
head facing upward.
Rotate the backing flange until one of the notches
is aligned with the hole in the gear head.
Insert the spanner provided into the hole to lock
the spindle.
www.TrueShopping.co.uk
Page: 25 of 69
To Next Page
Loading...
