TSC DA210 Series User Manual

17
4.2 Loading the Media
1. Open the printer top
cover by pulling the tabs.
2. Carefully pull to separate the
media holders.
3. Place the roll between
the holders.
4. Place the paper, printing side
face up, through the media
sensor and place the label
leading edge onto the platen
roller.
5. Gently close the top
cover ensuring that the
cover latches are firmly
secured. Use hardware
or software to make
calibration (Refer to
Chapter 4 and 5.).

TSC DA210 Series Specifications

General

Resolution	203 dpi / 300 dpi
Print Speed	Up to 6 ips (inches per second)
Processor	32-bit RISC
Interface	USB 2.0
Scanning Technology	Thermal transfer / Direct thermal
Scanning Speed	Up to 6 ips (inches per second)
Scanning Resolution	203 dpi / 300 dpi
Scanning Distance	N/A (Not applicable for barcode printers)
Additional Interface	Bluetooth (optional)
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	5 ~ 40°C (41 ~ 104°F)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)
Humidity	20% to 85% (non-condensing)
Supported Barcode Types	Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, PDF-417, DataMatrix, QR code