TSC MH240 Series User Manual

23
3. Release the lever
and thread the label
through the media
guide bar, damper,
media sensor, and
label guide to install
the media.
4. Adjust the lable
guide to make the
media position
fixed.
5. Adjust the sensor
the sensor to make
sure the media can
be detected.
6. Close the print
head .
Black mark sensor
(shown as ↓)
Gap sensor
(shown as▽)
Note: MH240 Series doesn’t attach the media guide bar.

TSC MH240 Series Specifications

General

Brand	TSC
Model	MH240 Series
Category	Barcode Reader
Language	English