What to do if my TSC MH341T displays 'No Paper'?
If your TSC Printer is displaying 'No Paper', you can: * Supply a new label roll. * Reinstall the label roll, referring to the steps in the user’s manual. * Calibrate the gap/black mark sensor.
How to resolve irregular printing on a TSC MH341T?
If your TSC Printer is printing irregularly, you can try: * Turning the printer off and on to skip the dump mode. * Re-setting the Rs-232 setting.
What to do if my TSC Printer can’t download files to memory?
If your TSC Printer is not downloading the file to memory (FLASH / DRAM/CARD), delete any unused files in the memory.
What to do if my TSC MH341T Printer keeps taking the label?
If the TSC Printer continues to 'Take Label', check the following: * If the peeler module is installed, remove the label. * Switch off the printer and reinstall it. * Check if the connector is plugged in correctly.
How to correct the left side printout position on a TSC Printer?
General| Print Technology | Thermal Transfer / Direct Thermal |
|---|---|
| Processor | 32-bit RISC CPU |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Print Resolution | 300 dpi |
| Print Speed | Up to 10 ips |
| Max. Print Width | 4.09 inches |
| Interface | USB 2.0, RS-232, Ethernet |
| Power Supply | 100-240V AC, 50-60Hz |
| Storage Temperature | -40°F to 140°F (-40°C to 60°C) |
| Humidity | 25-85% non-condensing |
Detailed technical specifications and features of the MH241 Series printers, including resolution, speed, and dimensions.
Step-by-step guide for physically setting up the printer, including placement and power/data connections.
Visual instructions for correctly loading a ribbon onto the printer's supply spindle.
Guides on preparing and placing a media roll onto the printer's label supply spindle.
How to adjust print head pressure to ensure optimal print quality based on media width.
Explains the ribbon tension adjustment knob and its settings for improving print quality.
Guidance on adjusting printer parts to prevent ribbon wrinkles for better print output.
Function to check print head health, set failure thresholds, and monitor print head condition.
Details the settings and options available under the TSPL command set for printer configuration.
Details the settings and options available under the ZPL2 command set for printer configuration.
Guide to calibrating the printer's media sensors (Gap, Black Mark, Continuous) for accurate media detection.
Tools for diagnosing printer issues, including self-tests, print head checks, and sensor diagnostics.
To Next Page
