TSC MX241P Series User Manual

63
Date & Time
Setup the date and time on display.
N/A
Security
Set the password for locking the menu or favorites. The default password is 8888.
Disable
Cutter Type
Set the cutter type.
Guillotine
Media Low Warning
Set the warning for media low %. if setting value is 10%, media capacity was lower
than 10%, the % will be shown in red.
10%
Ribbon Low Warning
Set the warning for ribbon low. For example, if setting value is 30m, when ribbon
capacity was lower than 30m, the will be shown in red.
30M
Printer Head Maintn
Check print head status and to set the settings for print head care.
Warning: Enable/disable the print head clean warning. If enable this feature, once
print head has been reached the setting mileage then the warning icon will be shown
on printer UI for reminding user to clean the print head. The default setting is disable.
Reset Counter: Reset the print head clean warning mileage after cleaning print head.
Interval: This item is used to set the expected mileage for reminding user to clean the
print head. You have to enable the “TPH warning lock” for use. The default setting is 1
km.
Key sound: This item is used to enable/disable the sound of front panel buttons.
N/A
Contact us
Check the contact information for tech support service
N/A

TSC MX241P Series Specifications

General

Brand	TSC
Model	MX241P Series
Category	Barcode Reader
Language	English