TSC PEX-1121 Series - Ethernet; Wi-Fi

- 46 -
Stop Bit(s)
This item is used to set the RS-232 Stop Bits.
1
7.5.2 Ethernet
Use this menu to configure internal Ethernet configuration check the print engine’s Ethernet
status, and reset the Ethernet module.
Item
Description
Default
Status
Use this menu to check the IP address and MAC setting
status.
N/A
Configure
DHCP:
This item is used to ON or OFF the DHCP (Dynamic
Host Configuration Protocol) network protocol.
Static IP:
Use this menu to set the print engine’s IP address,
subnet mask and gateway.
DHCP
7.5.3 Wi-Fi
This option is used to set the print engine Wi-Fi settings.
Item
Description
Default
Status
Use this menu to check the Wi-Fi IP address, MAC
setting status….
N/A
Menu Interface Ethernet
Status
Configure
Menu Interface Wi-Fi
Status
Config
SSID
Security
Password