TSC PRINTRONIX ML340P User Manual

19
5. Adjust the media sensor position adjustment knob, making sure the sensor can detect the media.
6. Adjust the label
guide to fix the
media position.
7. Close the print head mechanism on both
sides and make sure the latches had
engaged securely.
8. Set media sensor type and calibrate the
selected sensor.
Note:
* When installing label with 1 to 2 inches
width, please adjust Print Head Pressure
Position Adjustment Knob to left side.
Black mark sensor (shown as ↓)
Gap sensor (shown as▽)

TSC PRINTRONIX ML340P Specifications

General

Brand	TSC
Model	PRINTRONIX ML340P
Category	Printer
Language	English