TSC PRINTRONIX TX210 Series - Power-On Utilities

19
4.3 Power-on Utilities
Power-on Utilities provides the basic functions and can be activated by below procedures:
Turn off the power > Hold the Feed button > Open the power > Release the button depending on the the color of the LED.
Sequences of the settings:
LED Colors
Functions
Red
(5 blinks)
Red
(5 blinks)
Red
(5 blinks)
Red
(5 blinks)
Green
(5 blinks)
Green
(Solid)
1. Sensor Calibration
(Gap / black mark sensor)
Release
2. Self-Test
(And enter dump mode)
Release
3. Factory Default
Release
4. Bline Calibration
Release
5. Gap Calibration
Release
6. READY
(Skip AUTO.BAS)
Release