6.7 File Manager
File Manager is used to check the printer available memory, show the files list, delete the files or run the files that saved in the
printer DRAM/Flash/Card memory.
Use this menu to show, delete and run (.BAS) the files saved in the printer DRAM memory.
Use this menu to show, delete and run (.BAS) the files saved in the printer Flash memory.
Use this menu to show, delete and run (.BAS) the files saved in the SD card on printer.
Note:This subsection will only be visible when the SD card installed.
Menu File Manager
DRAM
FLASH
CARD
To Next Page
Loading...
Need help?
General
