TSC PRINTRONIX TX210 Series - Wi-Fi

43
6.6.4 Wi-Fi
Item
Description
Default
Operating
This item is used to set the operating mode of wireless local area networks to connect devices to
the networks.
Note:
Infrastructure mode requires the use of an access point for this communication to take
place.
Ad hoc mode involves connecting a computer directly to another computer.
Infrastructure
Scan AP
This item is used to scan the access point devise
N/A
DHCP
DHCP: On or OFF the DHCP (Dynamic Host Configuration Protocol) network protocol.
Static IP: Use this menu to set the printer’s IP address, subnet mask and gateway.
ON
Menu Interface Wi-Fi
Operating Mode
Scan AP
DHCP