TSC PRINTRONIX TX210 Series User Manual

36
Item
Description
Default
Density
Set the printing darkness. Available setting range: 0 to 30.
16
Print Speed
Set the print speed.
6 (203dpi)
4 (300dpi)
3 (600dpi)
Slew Speed
Use this item to setup feed speed. 203DPI: 1~8; 300DPI:1~6; 600DPI:1~4
2
BackFeed Speed
Use this item to setup back feed speed. Setting value is up to 6 ips.
2 ips
Tear Off
Adjust media stop location. Available setting value range: -120~120 dots.
0 dot
Print mode
Set the print mode. There are 4 modes:
Tear Off: Next label top of form is aligned to the print head heating line location.
Peeler Off: Enable the label peel off mode.
Cutter: Enable the label cutter mode
Applicator: The printer prints a label when it receives a signal from the applicator.
Tear Off
Print Width
Set the print width. Available setting range: 2 ~ 999 dots.
812
List Fonts
Print the current fonts list from the memory devices to the label.
N/A
List Images
Print current printer available images list stored at the memory device to the label.
N/A
List Formats
Print current printer available formats list from the memory devices to the label.
N/A
List Setup
Print current printer configuration to the label.
N/A
Control Prefix
Set control prefix character.
N/A
Format Prefix
Set format prefix character.
N/A

TSC PRINTRONIX TX210 Series Specifications

General

Brand	TSC
Model	PRINTRONIX TX210 Series
Category	Barcode Reader
Language	English