TSC TDP-245 Plus

TSC AUTO ID Technology Co., Ltd. 1 Copyright 2013 All Rights Reserved.
Setup and System Commands
 SIZE
Description
This command defines the label width and length.
Syntax
SIZE m,n
English system (inch)
SIZE m mm,n mm
Metric system (mm)
SIZE m dot,n dot
Dot measurement
This command has been supported since V6.27 EZ and later firmware.
Parameter
Description
M
Label width (inch/ mm/ dot)
N
Label length (inch/ mm/ dot)
Note :
 200 DPI : 1 mm = 8 dots
300 DPI : 1mm = 12 dots
 For metric and dot systems, there must be a space between parameter and “mm” or “dot”.
Example
Sample Code
 English system (inch):
SIZE 3.5,3.00
 Metric system (mm):
SIZE 100 mm,100 mm
Result
See Also
GAP, BLINE