TSC TDP-245 Plus Programming Manual

TSC AUTO ID Technology Co., Ltd. 146 Copyright 2013 All Rights Reserved.
 POSTINPUT
Description
This command can define the end character for command INPUT.
Syntax
POSTINPUT var$
POSTINPUT CHR$(n)
Parameter
Description
var$
The specific character or string in end of data.
n
n = 1 ~ 255
Note:
This command has been supported since V6.81 EZ and later firmware.
Example
POSTINPUT ">"
POSTINPUT CHR$(3)
See also
PREINPUT, INPUT, SET FILTER

TSC TDP-245 Plus Specifications

General

Brand	TSC
Model	TDP-245 Plus
Category	Barcode Reader
Language	English