TSC TE300 series - User Manual

i
USER’S
MANUAL
TE200/TE210/TE300/TE310 Series
THERMAL TRANSFER/DIRECT THERMAL
BAR CODE PRINTER

TSC TE300 series Specifications

General

Brand	TSC
Model	TE300 series
Category	Barcode Reader
Language	English

Summary

Agency Compliance and Approvals

Regulatory Compliance Standards

Important Safety Instructions

RF Exposure and Usage Statements

Canadian and RF Exposure Notices

1.4 Print Specifications

3. Setup

3.1 Setting up the Printer

Provides step-by-step instructions for connecting the printer to a power source and computer.

3.2 Loading the Ribbon

3.3 Loading the Media

3.3.1 Loading the Roll Labels

Instructions for loading roll labels onto the media supply spindle and positioning them for printing.

3.3.3 Loading the Media in Cutter mode (TE210;TE310 Series only, dealer option)

3.3.4 Loading the Media in Peel-off Mode (TE210;TE310 Series only, dealer option)

4. LED and Button Functions

4.3.1 Gap;Black Mark Sensor Calibration

4.3.2 Gap;Black Mark Calibration, Self-test and Dump Mode

4.3.3 Printer Initialization

4.3.4 Set Black Mark Sensor and Calibrate

4.3.5 Set Gap Sensor and Calibrate

4.3.6 Skip AUTO.BAS

5. Diagnostic Tool

5.1 Start the Diagnostic Tool

Instructions on how to launch and access the TSC Diagnostic Utility software.

5.2 Printer Function

5.3 Calibrating Media Sensor by Diagnostic Tool

5.3.1 Auto Calibration

Step-by-step guide for performing automatic media sensor calibration using the diagnostic tool.

6. Troubleshooting

6.1 Common Problems

Lists common issues encountered with the printer and their corresponding recovery procedures.

7. Maintenance

Print Head Cleaning

Instructions for cleaning the printer's print head using appropriate materials.

Platen Roller Cleaning