4. LED and Button Functions
This printer has one button and one three-color LED indicator. By indicating the LED with
different color and pressing the button, printer can feed labels, pause the printing job, select
and calibrate the media sensor, print printer self-test report, reset printer to defaults
(initialization). Please refer to the button operation below for different functions.
4.1 LED Indicator
This illuminates that the power is on and the device is ready to
use.
This illuminates that the system is downloading data from PC
to memory or the printer is paused.
This illuminates that the system is clearing data from printer.
This illuminates printer head open, cutter error.
This illuminates a printing error, such as head open, paper
empty, paper jam, ribbon empty, or memory error etc.
4.2 Regular Button Functions
1. Feed labels
When the printer is at ready states (Green/Solid), press the button to feed one label to the
beginning of next.
2. Pause the printing job
When the printer is at printing states, press the button to pause a print job. When the printer is
paused the LED will be green blinking. Press the button again to continue the printing job.
4.3 Power-on Utilities
There are six power-on utilities to set up and test printer hardware. These utilities are activated
by pressing FEED button then turning on the printer power simultaneously and release the
button at different color of LED.
Please follow the steps below for different power-on utilities.
1. Turn off the printer power switch.
2. Hold on the button then turn on the power switch.
3. Release the button when LED indicates with different color for different functions.
To Next Page
Loading...
Need help?
General
