TSC TE310 Series User Manual

17
3.3.2 External Label Roll Mount Installation (Option)
1. Attach the extended plate on the
bottom of the printer.
2. Insert a 3” (or 1”) label spindle into a
paper roll. Then, install it on the
external paper roll mount.
3. Feed the media through the rear
external label entrance chute.
1” label spindle
3” label spindle

TSC TE310 Series Specifications

General

Resolution	203 dpi / 300 dpi
Print Method	Thermal transfer / Direct thermal
Interface	Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)
Humidity	20% to 85% (non-condensing)