TSC TE310 Series User Manual

48 pages

To Next Page

To Previous Page

4. Refer to chapter 3.3.1 to install the

label. Use “Diagnostic Tool” to set

the media sensor type and calibrate

the selected sensor.

Note:

Please calibrate the gap/black mark sensor when changing media.

Other manuals for TSC TE310 Series

Need help?

Do you have a question about the TSC TE310 Series and is the answer not in the manual?

General

Resolution	203 dpi / 300 dpi
Print Method	Thermal transfer / Direct thermal
Interface	Ethernet
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)
Humidity	20% to 85% (non-condensing)