- 55 -
6.3 Setup
This “Setup” category can set up the printer settings for TSPL2, ZPL2, sensor, serial
interface, and Ethernet interface.
6.3.1 Printer Setup (TSPL2/ ZPL2)
TSPL2
This “TSPL” category can set up the printer settings for TSPL2.
Use this item to setup print speed. The each increase or decrease
is 1 ips. Available setting is from 4 to 12.
Use this option to setup printing darkness. The available setting is
from 0 to 15, and the step is 1. You may need to adjust your
density based on selected media.
To Next Page
Loading...
Need help?
General
