1
USING THE VELOMETER
®
ANEMOMETER SAFELY
All necessary precautions must be observed when operating the
Velometer
®
Anemometer in the vicinity of moving equipment such as
motors and blowers. You must exercise care to ensure that the probe or
the instrument does not interfere with any moving equipment.
The maximum temperature at which the Velometer
®
Anemometer can be
used is 250°F (120°C). The maximum pressure difference between the
inside of the instrument housing and ambient is 4.2 psi. (8.6 gm/cm
2
).
The Velometer
®
Anemometer is not designed for gas mixtures other
than air.
Any use beyond the operational temperature or pressure limits, or on
gasses which are either combustible or may deteriorate materials in the
Velometer
®
Anemometer, is not recommended.
Note: Opening or otherwise attempting to service your TSI instrument
will void the warranty. Please read the warranty statement carefully.
To Next Page
Loading...
